True Orgonite · Learn · Make · Share

Materials and Techniques

Understand the materials. Document your method.

A practical introduction for Cloudbusters, pyramids, plates and other resin-based craft projects. Different makers use different methods; record what you actually do and follow your material manufacturers' instructions.

01 · Resin

Binder, mixing and curing

Resin holds the solid inclusions together. Record the product name, resin type, mixing ratio, batch size and cure conditions. Use the manufacturer's stated proportions and maximum pour depth; these vary between products.

A decorative surface does not reveal what is inside a cured piece. Photograph ingredients and layers during construction if you want others to understand the composition.

02 · Metals

Shavings, wire and tubing

Record the metal type, form and quantity. Copper tubing, wire, metal shavings and powders behave differently during handling and casting. Keep dimensions and units clear, especially for pipe assemblies and spacers.

Metal edges and cut pipes can be sharp. Use appropriate tools, deburr edges where relevant, and avoid creating or inhaling dust.

03 · Quartz and inclusions

Show what you include

List quartz and other stones or inclusions by the names you can support. Document their size, quantity and placement with photographs before the resin cures.

If you include a coil or decorative symbol, describe its physical arrangement separately from any beliefs about its purpose. Do not present an untested energy or health claim as a material property.

04 · Technique

Moulds, assembly and finishing

Record the mould material, preparation, release method, assembly order and finishing steps. Keep tube supports and spacing clear in a Cloudbuster build record.

Resin compatibility, heat generation, shrinkage and curing vary. A recipe from another maker does not replace the instructions for your specific materials.

Workshop care

  • Read the resin safety data sheet before starting. Follow its ventilation, protective equipment, handling and disposal instructions.
  • Protect eyes and skin as required for the task. Keep uncured materials away from children, pets, food and drains.
  • Use a stable work area and a suitable mould. Plan for the heat produced during curing and follow the manufacturer's batch and pour limits.
  • Control dust during cutting, sanding or handling powders. Use suitable extraction and respiratory protection where required.
  • Secure tall pipe structures against falling, and keep them well away from overhead electrical lines.

Share what went wrong as well as what worked. Practical lessons help others make better-informed decisions.

Share your method →Yvonne Jansen's making guide →Explore build journals →